A guide to the language of steel

The steelmaking process is complex, with many phrases and terms that are unique to the industry.


 

Annealing

The heat treatment process by which steel product are reheated to a suitable temperature in order to remove stresses from previous processing and to soften them and/or improve their machinability and cold forming properties.

 

Alloy steel

Alloy steels have enhanced properties due to the larger proportion of elements such as manganese and silicon present in carbon steels.

 

Apparent consumption

The sum of net industry shipments within a given country or region, plus its imports and minus its exports.

 

Bar

A finished steel product, commonly in flat, square, round or hexagonal shapes. Rolled from billets, bars are produced in two major types: merchant and special.

 

Billet

A semi-finished steel product with a square cross section up to 155mm x 155mm. This product is either rolled or continuously cast and is then transformed by rolling to obtain finished products like wire rod, merchant bars and other sections. The range of semi-finished products above 155 mm x 155 mm are called blooms.

 

Blank

Steel sheet of high dimensional precision, in simple or complex form, sometimes multi-thickness, constituting principally automobile body parts.

 

Blast furnace

Blast furnace is a furnace used in integrated steelmaking in which coke and iron ore react together under a hot air flow to form liquid hot metal, also called pig iron.

 

Carbon steel

A type of steel that generally has only a small quantity of elements other than carbon, silicon, manganese, sulphur and phosphorus, so it has no significant alloying element.

 

Coal

The primary fuel used by integrated iron and steel producers.

 

Coated steels

Steel is coated by a heat process, or through electrolysis, with a layer to protect the metal base against corrosion. The most commonly used coating material is zinc which can be applied either using the heat process (hot-dip galvanising) or using electrolysis (electro-galvanising). An organic coating (paint, plastic) can also be deposited on the zinc layer.

 

Coil

A finished steel product such as sheet or strip which has been wound or coiled after rolling called coil.

 

Coke

A form of carbonised coal burned in blast furnaces to reduce iron ore pellets or other iron-bearing materials iron.

 

Coke ovens

Ovens where coke is produced. Coal is usually dropped into the ovens through openings in the roof, and heated by gas burning in flues in the walls within the coke oven battery. After heating for about 18 hours, the end doors are removed and a ram pushes the coke into a quenching car for cooling before delivery to the blast furnace.

 

Cold rolling

Passing a sheet or strip that has previously been hot rolled and picked through cold rolls. Cold rolling makes a product that is thinner, smoother and stronger than can be made by hot rolling alone.

 

Continuous casting

Continuous casting is a process for solidifying steel in the form of a continuous strand rather than individual ingots. Molten steel is poured into open-bottomed, water-cooled moulds. As the molten steel passes through the mould, the outer shell solidifies.

 

Crude steel

Steel in the first solid state after melting, suitable for further processing or for sale. Synonymous of crude steel is a raw steel.

 

Galvanised steel

Produced when hot or cold roll sheet or strip is coated with zinc, either by the hot-dipping or electrolytic deposition processes. zinc coating applied by the hot dip method is normally heavy enough to resist corrosion without additional protective coating. Materials electronically galvanised are not used for corrosion-resistant applications without subsequent chemical treatment and painting, except in mild corrosive conditions, due to the thin coating of zinc. Galvanise is a pure zinc coating. A special heat-treating process converts the pure zinc coating to a zinc/iron alloy coating, and the product is known as Galvanneal.

 

Hot and cold rolling mill

Hot-rolling mill: Equipment on which solidified steel preheated to a high temperature is continuously rolled between two rotating cylinders.

Cold-rolling mill: Equipment that reduces the thickness of flat steel product by rolling the metal between alloy steel cylinders at room temperature.

 

Hot metal

Hot metal is a molten iron produced in the blast furnace.


Shanghai Metal Corporation is a trusted aluminum alloyaluminum foil pricestainless steel price and stainless steel manufacturer, kinds of stainless steel in china.

Guest contributors are welcome at the Alloy Wiki.It is a weekly wiki and guide on alloy information and processing technology, while also about the vast array of opportunities that are present in manufacturing. Our team of writers consists of a Machining Material Supplier / Machinist / Tool and Die Maker, a Biomedical Engineer / Product Development Engineer, a Job Development Coordinator / Adjunct Professor, and a President and CEO of a manufacturing facility.

Link to this article:A guide to the language of steel

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting:Alloy Wiki,thanks

Related Posts